| Part no | Description | Weight | Inquiry |
| 454.2523-901 | Spherical bearing,Contains of inner and outer ring | ||
| 454.2536-001 | Retainer - Spherical bearing | ||
| 454.2540-001 | Holder - Grease seal | ||
| 454.2097-001 | Seal - Spherical bearing | ||
| 454.2621-001 | Scraper - Spherical bearing | ||
| 454.2679-901 | Stud spider/upper topshell As. | ||
| 454.2680-901 | Bolt Spider/Upper topshell As. | ||
| 454.3053-001 | Liner | ||
| 454.3054-001 | Liner | ||
| 454.3055-001 | Liner | ||
| 454.2846-901 | Square head bolt - Spider rim liner | ||
| 454.2831-001 | Spider cap | ||
| 454.2533-001 | Bushing - Spherical bearing | ||
| 454.3093-901 | Liner - Spider arm | ||
| 454.2834-901 | Square head bolt - Spider arm liner | ||
| 454.5738-901 | Cover - spherical bearing,See chapter 1b | ||
| 454.1706-001 | Topshell - Lower | ||
| 454.3003-901 | Concave support ring set | ||
| 454.2648-901 | Bolt - Upper-/Lower topshell | ||
| 454.3040-901 | Concave Row 1 Assembly | ||
| 454.2788-901 | Concave Row 1, Key,Included in position 7 | ||
| 454.2781-901 | Concave Row 1 | ||
| 454.2785-901 | Concave Row 1, Trans. R | ||
| 454.2786-901 | Concave Row 1, Trans. L | ||
| 454.3042-901 | Concave Row 2 Assembly | ||
| 454.2795-901 | Concave Row 2, Key,Included in position 8 | ||
| 454.2791-901 | Concave Row 2, 1-bolt | ||
| 454.2793-901 | Concave Row 2, 2-bolt | ||
| 454.3043-901 | Concave Row 3 Assembly | ||
| 454.2801-901 | Concave Row 3, Key,Included in position 9 | ||
| 454.2799-901 | Concave Row 3 | ||
| 454.3044-901 | Concave Row 4 Assembly | ||
| 454.2808-901 | Concave Row 4, Key,Included in position 10 | ||
| 454.2804-901 | Concave Row 4, 1-bolt | ||
| 454.2806-901 | Concave Row 4, 2-bolt | ||
| 454.2631-901 | Retaining bolt -Concave row 1 | ||
| 454.2637-901 | Retaining bolt -Concave row 2 | ||
| 454.2637-901 | Retaining bolt -Concave row 3 | ||
| 454.2637-901 | Retaining bolt -Concave row 4 | ||
| 454.3775-001 | Topshell - Upper | ||
| 454.2545-001 | Mainshaft | ||
| 454.2546-001 | Mainshaft sleeve | ||
| 454.3789-001 | Stopper - Mainshaft sleeve | ||
| 454.2547-001 | Protective ring - Mainshaft,Split ring | ||
| 454.2550-001 | Threaded collar - Mainshaft,4 litre (1,06 gal (US)) | ||
| 454.2551-001 | Head nut | ||
| 454.2650-001 | Holder - Dust seal ring,Use loctite | ||
| 454.2555-901 | Dust seal ring | ||
| 454.2656-901 | Retainer - Dust seal ring | ||
| 454.3927-001 | Mantle | ||
| 454.3788-001 | Lifting eye bolt | ||
| 454.4564-001 | Bottomshell | ||
| 454.2559-001 | Bottomshell bushing | ||
| 454.2560-001 | Key Bottomshell bushing | ||
| 454.2937-901 | Liner set - Bottomshell hub | ||
| 454.3506-901 | Pipe - Return oil outlet | ||
| 454.2563-901 | Liner Narrow arm | ||
| 454.2564-901 | Liner Pinionshaft arm | ||
| 454.2893-901 | Dust collar,Push bolt | ||
| 454.2567-001 | Retainer - Oil splash ring | ||
| 454.3420-901 | Pipe Oil inlet | ||
| 454.3422-901 | Pipe Air inlet | ||
| 454.3993-901 | Liner set - Bottomshell | ||
| 454.2572-001 | Countersunk head bolt | ||
| 454.2582-001 | Key Spiral bevel gear | ||
| 454.2583-001 | Eccentric support plate | ||
| 454.2587-001 | Eccentric bushing | ||
| 454.2588-001 | Eccentric wearing plate | ||
| 454.2584-901 | Gear and pinion set | ||
| 454.3783-001 | Pinionshaft housing | ||
| 454.3797-001 | Pinionshaft | ||
| 845.0423-00 | Lock nut HM 3044 | ||
| 454.3802-001 | Bearing cover - Pinion end | ||
| 454.1065-001 | Labyrinth collar | ||
| 454.1060-001 | Bearing cover - Outer end | ||
| 454.3760-001 | Roller bearing Spherical 22344 CAE4 | ||
| 454.3803-001 | Roller bearing Cylindrical NU2344EC | ||
| 454.3804-001 | Spacer - Pinion end | ||
| 454.1066-001 | Retainer - Pinion end | ||
| 840.1277-00 | Screw M6S M42x220 8.8 ZP,Push bolt (Pinionshaft housing) | ||
| 454.3783-001 | Pinionshaft housing | ||
| 454.3797-001 | Pinionshaft | ||
| 454.3802-001 | Bearing cover - Pinion end | ||
| 454.1066-001 | Retainer - Pinion end | ||
| 454.3038-001 | Hydroset cylinder cover | ||
| 454.3041-001 | Piston - Hydroset | ||
| 454.2591-001 | Guide bushing | ||
| 454.2592-001 | Concave adapter | ||
| 454.2593-001 | Convex adapter | ||
| 454.2595-001 | Shim 1,0 mm | ||
| 454.3779-001 | Shim 0,8 mm | ||
| 454.3780-001 | Shim 0,5 mm | ||
| 454.2596-001 | Stopper V-packing | ||
| 454.2958-001 | Back-up ring | ||
| 454.3790-901 | Step bearing set | ||
| 454.2965-001 | Pin - Piston wearing plate | ||
| 454.2598-001 | Retaining boss | ||
| 454.2602-001 | Elbow | ||
| 984.0421-00 | Position sensor EDS-400-I-SR | ||
| 454.3050-901 | Retainer | ||
| 900.2515-00 | Bushing 2”x1/2 | ||
| 900.3043-00 | Bushing 1/2”x1/4” | ||
| 902.1112-00 | Pilot operated check valve,PCV1 | ||
| 984.1504-00 | Pressure transmitter,B2N | ||
| 984.1134-00 | Level transmitter,LT1,Inside tank | ||
| 984.1503-00 | Temperature transmitter,B3N | ||
| 454.6004-001 | Piston, cylinder | ||
| 454.3523-90 | OIL SPLASH CURTAIN SET | ||
| 454.2997-00 | Protection Segment | ||
| 307002502 | Shear tube (L39) |
ZHEJIANG ROCK MACHINERY CO., LTD
Registered in China
Registration number: 91330782MACQ9CX477
Focus on ore processing machines
Leader of aftermarket mining parts
Over 20 years of specialized experience
Full parts support
Fast delivery and quick response
Sales representative:
Tel:
WhatsApp:
WeChat:
Complaints and suggestions
©2025 ZHEJIANG ROCK MACHINERY CO., LTD