| Part no | Description | Weight | Inquiry |
| 452.0230-901 | Bottom shell | ||
| 442.7140-00 | Liner-Pin Shaft Arm | ||
| 442.7141-00 | Liner-Norrow Arm | ||
| 442.7146-01 | Bottom shell bushing | ||
| 442.7106-01 | Dust collar | ||
| 442.7151-01 | Eccentric | ||
| 442.9643-01 | Eccentric bushing 13+16+20+24,without keyway 442.9404 | ||
| 442.9642-01 | Eccentric bushing 24 28 32 | ||
| 442.9406-01 | Eccentric bushing 32+36+40+44 | ||
| 442.7142-01 | Hub | ||
| 442.7093-00 | Gear and pinion set | ||
| 442.7107-01 | Eccentric wearing plate | ||
| 442.7163-01 | Hydroset cylinder | ||
| 442.7166-01 | Hydroset cylinder bushing | ||
| 442.9672-00 | Piston | ||
| 442.7122-01 | Piston wearing plate | ||
| 442.7121-01 | Step washer | ||
| 442.7112-00 | Chevron packing | ||
| 442.9663-00 | Hydroset cylinder cover | ||
| 442.9966-00 | Pinion shaft housing assembled | ||
| 442.7506-01 | Pinion shaft housing | ||
| 442.7093-02 | Pinion | ||
| 868.0282-00 | Bearings Spherical Roller 23122 CC/W33/C3 | ||
| 868.0804-00 | Tapered roller bearing 452322 M2/W502 | ||
| 442.9937-01 | Pinion shaft | ||
| 442.7259-00 | Main shaft ass. excl mantle | ||
| 442.7100-01 | Main shaft | ||
| 442.7117-01 | Main shaft sleeve | ||
| 442.7120-01 | Main shaft step | ||
| 442.8332-01 | Head centre | ||
| 442.7230-01 | Mantle B, M-EC, M1 | ||
| 442.7225-01 | Mantel A,F+MF, M1 | ||
| 442.9073-01 | Mantel | ||
| 442.8039-01 | Mantle EF, M1 | ||
| 442.7105-01 | Head nut | ||
| 442.8333-01 | Inner head ring | ||
| 442.7102-01 | Dust seal ring | ||
| 442.7103-01 | Retaining ring | ||
| 442.8553-00 | Top shell ass excl concave ring | ||
| 442.7180-01 | Top shell | ||
| 442.7190-01 | Arm shield | ||
| 442.7492-01 | Spider cap | ||
| 442.9408-01 | Spider bushing | ||
| 442.7193-01 | Spider bushing oil seal ring | ||
| 442.8416-01 | Concave ring EF, M1 | ||
| 442.8417-01 | Concave ring F, M1 | ||
| 442.8418-01 | Concave ring MF, M1 | ||
| 442.8420-01 | Concave ring MC , M1 | ||
| 442.8421-01 | Concave ring C, M1 | ||
| 452.3027-001 | Concave EC Topgrip | ||
| 442.8419-01 | Concave ring M, M1 | ||
| 442.7485-01 | Filler ring MC, M, EF | ||
| 442.7484-01 | Filler ring MF, F | ||
| 442.8425-01 | Support ring | ||
| 442.7273-00 | Hydroset | ||
| 442.7140-00 | Liner-Pin shaft arm,Arm liners | ||
| 442.7141-01 | Liner-Narrow arm,Arm liners | ||
| 452.0243-00 | Bottomshell liner kit | ||
| 442.8794-01 | Wearing plates,Included in Bottomshell liner kit | ||
| 442.8798-01 | Wearing plates,Included in Bottomshell liner kit | ||
| 442.8797-01 | Wearing plates,Included in Bottomshell liner kit | ||
| 442.8796-01 | Wearing plates,Included in Bottomshell liner kit | ||
| 442.8795-01 | Wearing plates,Included in Bottomshell liner kit | ||
| 452.0239-001 | Wearing plates,Included in Bottomshell liner kit | ||
| 452.0238-001 | Wearing plates,Included in Bottomshell liner kit | ||
| 442.7191-00 | Feed hopper | ||
| 442.7191-90 | Feed hopper with insp. door | ||
| 442.7267-00 | Feed distributer -RH,Fasteners for distributer parts | ||
| 442.7267-90 | Feed distributer-LH,Fasteners for distributer parts | ||
| 442.7270-00 | Feed hopper with cone complete | ||
| 442.7192-00 | Feed hopper cone-LH,For concave EC | ||
| 442.7192-90 | Feed hopper cone-RH,For concave EC | ||
| 442.8159-00 | Feed hopper cone-LH,For concave C | ||
| 442.8159-90 | Feed hopper cone-RH,For concave C | ||
| 442.8030-00 | Feed hopper cone-LH,For concave MC | ||
| 442.8030-90 | Feed hopper cone-RH,For concave MC | ||
| 442.9777-90 | Rubber compression mountings for crusher on subframe | ||
| 442.8624-00 | Check valve | ||
| 919.0219-00 | Accumulator charching pressure 5,0 MPA Without ASR/ With ASR Plus | ||
| 442.9949-00 | V-belt drive SPC, 4-pol 50 Hz,Complete | ||
| 879.0359-00 | V-belt Pulley 375 MGT 125 10xSPC | ||
| 869.0235-00 | Bushing MGT NR 125 ø100 | ||
| 879.0496-00 | V-belt Pulley 450 MGT 125 10xSPC | ||
| 869.0235-00 | Bushing MGT no 125 Ø100 | ||
| 879.0359-00 | V-belt pulley 375 MGT 125 10xSPC | ||
| 869.0329-00 | Bushing QD M100 Ø100 | ||
| 879.0617-00 | V-belt Pulley QD DY17” 10x8V | ||
| 442.7140-00 | Pin shaft arm liner | ||
| 442.7141-00 | Narrow arm liner | ||
| BG00566212_main-shaft | Main shaft assembly excluding mantle | ||
| BG00566212_head-center | Main shaft assembly excluding mantle | ||
| 442.7098-00/452.0230-901/452.6391-901 N11851174 | BOTTOM SHELL H/S 4000 | ||
| 442.7140-00 MM1224534 | PINIONSHAFT ARMLNR 14MNCR H/S4000 | ||
| 442.7146-01 | BTTMSHELL BUSHING H/S4000, N11851199 | ||
| 452.0243-901 | BOTTOM SHELL LINER KIT, N11852114 | ||
| 442.8794-01 N11851466 | WEAR PLATE / BOTTOM SHELL /CH440 (ASSY N11852114) | ||
| 442.8798-01 N11851470 | WEAR PLATE / BOTTOM SHELL /CH440 (ASSY N11852114) | ||
| 442.8797-01 N11851469 | WEAR PLATE / BOTTOM SHELL /CH440 (ASSY N11852114) | ||
| 442.8796-01 N11851468 | WEAR PLATE / BOTTOM SHELL /CH440 (ASSY N11852114) | ||
| 442.8795-01 N11851467 | WEAR PLATE / BOTTOM SHELL /CH440 (ASSY N11852114) | ||
| 452.0239-001 N11852115 | WEAR PLATE / BOTTOM SHELL /CH440 (ASSY N11852114) | ||
| 452.0238-001 N11852116 | WEAR PLATE / BOTTOM SHELL /CH440 (ASSY N11852114) | ||
| 841.0019-00 2878650 | SCREW, CAP, HEXAGON SOCKET HEAD ISO4762-M10X40-8.8-A3F | ||
| 442.8068-01 N11851369 | ECCENTRIC /S4000 | ||
| 442.9643-01 | ECCENTRIC BUSHING 13+16+20+24 /H4000/CH440, N11851661 | ||
| 442.9642-01 | ECCENTRIC BUSHING 24+28+32 / H4000/CH440, N11851660 | ||
| 442.9406-01 | ECCENTRIC BUSHING 32+36+40+44 /H4000/CH440, N11851617 | ||
| 841.0025-00 7001540191 | SCREW, CAP, HEXAGON SOCKET HEAD ISO4762-M12X50-12.9-UNPLTD | ||
| 841.0025-00 7001540191 | SCREW, CAP, HEXAGON SOCKET HEAD ISO4762-M12X50-12.9-UNPLTD | ||
| 442.7093-00/442.9330-00 N11851173 | GEAR SET H/S4000 | ||
| 442.7107-01 | ECCENTRIC WEARING PLATE H/S4000, N11851179 | ||
| 442.7166-01 N11851202 | PISTON CYLINDER BUSHING H/S4000 | ||
| BG00259470 | STEP BEARING SET (2260/2280/4075) LAPPED, N11852206 | ||
| 442.7122-01 | PISTON WEARING PLATE, N11851187 | ||
| 442.7121-01 | STEP WASHER, N11851186 | ||
| 841.0266-00 704104000000 | SCREW, CAP, HEXAGON SOCKET HEAD ISO4762-M12X25-8.8-A3A | ||
| 442.9966-901/ 452.6395-901 N11851941 | PINION SHAFT HOUSING ASSY | ||
| 442.7506-01 N11851252 | PINION SHAFT HOUSING H/S4000 | ||
| 442.7129-01/442.9937-01 N11851188 | PINION SHAFT H/S4000 | ||
| 906.0367-00 | PUMP, HYDRAULIC P3AAN0075FL20B01N | ||
| 452.1699-901 | MAIN SHAFT ASSEMBLY S4000, 442.9035-AD, N11851877 | ||
| 442.7745-AD N11851874 | MAIN SHAFT ASSEMBLY H4000 | ||
| 442.8062-01 | MAIN SHAFT S4000 / USE ASSY N11851877 | ||
| 442.7100-01 | MAIN SHAFT H4000 / USE ASSY N11851874, N11851175 | ||
| BG00213813 | TAPERED MAINSHAFT SLEEVE CH440:2: BLOCK U.S.A!!, N11852051 | ||
| 442.7120-01 N11851185 | MAIN SHAFT STEP | ||
| 442.8332-01 N11851391 | HEAD H4000 / USE ASSY N11851874 | ||
| 442.8063-01 | HEAD S4000 / USE ASSY N11851877 | ||
| 442.7230-03 | MANTLE B 21MNCR CH440, MM1328259 | ||
| 442.7225-03 | MANTLE A 21MNCR CH440, MM1328257 | ||
| 442.8089-02 | MANTLE A 18MNCR CS440, MM1328230 | ||
| 442.8039-02 | MANTLE EF 18MNCR CH440, MM1328226 | ||
| 442.9073-02 | MANTLE HC 18MNCR CH440, MM1328181 | ||
| 442.7225-02 | MANTLE A 18MNCR CH440, MM1328174 | ||
| 442.8070-03 | MANTLE B 21MNCR CS440, MM1328138 | ||
| 442.8089-03 | MANTLE A 21MNCR CS440, MM1328137 | ||
| 442.8070-01 | MANTLE B 14MNCR CS440, MM1225653 | ||
| 442.8089-01 | MANTLE A 14MNCR CS440, MM1224791 | ||
| 442.8039-03 | MANTLE EF 21MNCR CH440, MM1224740 | ||
| 442.8039-01 | MANTLE EF 14MNCR CH440, MM1224738 | ||
| 442.7225-01 | MANTLE A 14MNCR CH440, MM1224552 | ||
| 442.9073-03 | MANTLE HC 21MNCR CH440, MM1224317 | ||
| 442.9073-01 | MANTLE HC 14MNCR CH440, MM1224316 | ||
| 442.7230-02 | MANTLE B 18MNCR CH440, MM1223128 | ||
| 442.7105-00 | HEAD NUT WITH RING, N11851695 | ||
| 442.8333-01 N11851392 | HEAD NUT INNER | ||
| 442.8059-01 N11851365 | TOP SHELL EC2 S4000 | ||
| 442.8553-901 | TOP SHELL EC2 H4000, N11851213 | ||
| 442.8075-01 | SPIDER ARM SHIELD 14MNCR CS440, MM1224762 | ||
| 442.9164-00 | SPIDER CAP TPE /S4000, N11851532 | ||
| BG00237121 | SPIDER BUSHING MNBR, N11852031, 442.9408-01 | ||
| 442.9408-01 N11851618 | SPIDER BUSHING STD | ||
| 442.8418-03 | CONCAVE MF 21MNCR CH440, MM1328267 | ||
| 452.3027-003 | CONCAVE EC TOPGRIP 21MNCR CH440, MM1328258 | ||
| 442.8421-02 | CONCAVE C 18MNCR CH440, MM1328240 | ||
| 442.8420-02 | CONCAVE MC 18MNCR CH440, MM1328234 | ||
| 442.8418-02 | CONCAVE MF 18MNCR CH440, MM1328233 | ||
| 442.8416-02 | CONCAVE EF 18MNCR CH440, MM1328219 | ||
| 452.3027-002 | CONCAVE EC TOPGRIP 18MNCR CH440, MM1328180 | ||
| 442.8417-02 | CONCAVE F 18MNCR CH440, MM1328177 | ||
| 442.8419-02 | CONCAVE M 18MNCR CH440, MM1328175 | ||
| 442.8417-03 | CONCAVE F 21MNCR CH440, MM1328150 | ||
| 442.8419-03 | CONCAVE M 21MNCR CH440, MM1328133 | ||
| 442.8421-03 | CONCAVE C 21MNCR CH440, MM1225664 | ||
| 442.8421-01 | CONCAVE C 14MNCR CH440, MM1225663 | ||
| 442.8416-03 | CONCAVE EF 21MNCR CH440, MM1224755 | ||
| 442.8416-01 | CONCAVE EF 14MNCR CH440, MM1224753 | ||
| 442.8417-01 | CONCAVE F 14MNCR CH440, MM1224551 | ||
| 442.8419-01 | CONCAVE M 14MNCR CH440, MM1223160 | ||
| 442.8420-03 | CONCAVE MC 21MNCR CH440, MM1223036 | ||
| 442.8420-01 | CONCAVE MC 14MNCR CH440, MM1223035 | ||
| 442.8418-01 | CONCAVE MF 14MNCR CH440, MM1223009 | ||
| 442.8425-01 | CONCAVE SUPPORT RING, N11851405 | ||
| 442.8098-90 | CONCAVE RING LOWER C 18MNCR CS440, MM1328188 | ||
| 452.0273-902 | CONCAVE RING LOWER MC 18MNCR CS440, MM1328156 | ||
| 452.1955-902 | CONCAVE RING EC, STEPPED 2 18MNCR CS440, MM1328145 | ||
| 442.8114-91 | CONCAVE RING EC 21MNCR CS440, MM1328140 | ||
| 442.8098-91 | CONCAVE RING LOWER C 21MNCR CS440, MM1328139 | ||
| 452.1972-901 | CONCAVE RING LOWER MC STEPPED 2 18MNCR CS440, MM1224765 | ||
| 442.8098-00 | CONCAVE RING LOWER C 14MNCR CS440, MM1223174 | ||
| 452.0273-903 | CONCAVE RING LOWER MC 21MNCR CS440, MM1223173 | ||
| 452.0273-901 | CONCAVE RING LOWER MC 14MNCR CS440, MM1223172 | ||
| 442.8114-00 | CONCAVE RING EC 14MNCR CS440, MM1222987 | ||
| 452.1955-903 | CONCAVE RING EC, STEPPED 2 21MNCR CS440, MM1222986 | ||
| 452.1955-901 | CONCAVE RING EC, STEPPED 2 14MNCR CS440, MM1222985 | ||
| 442.8099-90 | CONCAVE SEGMENT UPPER C 18MNCR CS440, MM1225655 | ||
| 442.8099-00 | CONCAVE SEGMENT UPPER C 14MNCR CS440, MM1225654 | ||
| 912.0127-00 | DIFFERENTIAL PRESSURE GAUGE PIS3097/2,2 | ||
| 930.0237-00 | COUPLING HALF D38 05-32-540 | ||
| 902.0723-00 | VALVE PRESS. RELIEF DN 32 474322 0,7MPa | ||
| 906.0270-00 | PUMP HPI PUMP, P/N P3BAN2004HL10B02, 17-107-518-002 | ||
| 919.0165-00 | ACCUMULATOR EHV ACCU 24.5-330/90 | ||
| 912.0128-00 | FILTER HEAD PI 2205-56 (-47) | ||
| 869.0295-00 | BUSHING 125-90 | ||
| 869.0283-00 | BUSHING 125-95 | ||
| 869.0278-00 | BUSHING 125-85 | ||
| 869.0261-00 | BUSHING 125-80 | ||
| 869.0235-00 | BUSHING 125-100 | ||
| 452.5575-901 | PINION SHAFT REPAIR KIT, N11852118 | ||
| 452.5778-901 | BOTTOM SHELL ARM LINER KIT, N11852117 | ||
| MM1218198 | MANTLE LIFTING TOOL (for Metso re-engineered mantles) | ||
| 825.0182-00 | SPIDER BUSHING GREASE (18 KG) | ||
| BG00395484 | Top shell excluding concave | ||
| BG01116734 | Spider Cap | ||
| BG00579403 | Pinion Shaft Housing Assembly | ||
| BG00228120 | Piston Step Bearing | ||
| BG00228541 | Step Washer | ||
| BG00227004 | Main Shaft Step Bearing | ||
| 452.0231-001 | Bottom shell | ||
| 452.5792-901 | Fastener kit for concave | ||
| BG00570208 | Bottom Shell Assembly | ||
| BG00514234 | Mainshaft cover CH440/CS440 | ||
| 902.0747-00 | VALVE 607.03 U check valve | ||
| BG00566212 | Main shaft assembly excluding mantle | ||
| 442.5663-90 | Check valve | ||
| BG00566233 | Main shaft Assembly including mantle | ||
| BG00296295 | Mainshaft including mantle | ||
| BG00296337 | Mainshaft assembly | ||
| BG00262713 | MANTLE OPTIAGG - S | ||
| 442.7140-01 | Arm shield | ||
| 978.0595-00 | Connection box | ||
| 923.0521-00 | Power Transuder | ||
| 902.0657-00 | Base plate | ||
| 978.0640-00 | TANK MEASSURMENT UNIT | ||
| P3BAN1003CL10B01N | PUMP, HYDRAULIC | ||
| P3BAN2004HL10B02 | PUMP HPI PUMP | ||
| 442.7180-00 | TOP SHELL EC2 H4000 | ||
| 442.8416-01 | Bowl liner | ||
| 442.8038-01 | Bowl liner | ||
| 442.8422-01 | Bowl liner | ||
| 442.7259-901 | Mainshaft assembly | ||
| 442.9665-00 | MAINSHAFT POSITION SENSOR | ||
| 910.0176-01 | Cooler LAC 056 -60Hz-460V | ||
| 442.8422-02 | Bowl liner | ||
| BG01316829 | Valve | ||
| 879.0636-00 | Pulley | ||
| 442.8553-902 | Top shell assembly | ||
| 442.9664-01 | Piston | ||
| BG00395265 | Top shell assy | ||
| 902.0800-00 | VALVE REPAIR KIT | ||
| 902.0801-00 | VALVE REPAIR KIT | ||
| 442.8421-05 | CONCAVE C M9 | ||
| 452.0230-902 | Bottom shell assembly | ||
| 452.6444-901 | Eccentric assembly | ||
| 442.7230-05 | MANTLE B M9 | ||
| 442.8419-05 | CONCAVE M M9 | ||
| 442.8417-05 | CONCAVE F M9 | ||
| 442.8422-03 | Bowl liner |
ZHEJIANG ROCK MACHINERY CO., LTD
Registered in China
Registration number: 91330782MACQ9CX477
Focus on ore processing machines
Leader of aftermarket mining parts
Over 20 years of specialized experience
Full parts support
Fast delivery and quick response
Sales representative:
Tel:
WhatsApp:
WeChat:
Complaints and suggestions
©2025 ZHEJIANG ROCK MACHINERY CO., LTD