| Part no | Description | weight |
| BG00136959 | Inspection hatch shaft | |
| BG00285280 | Arm shield retainer ring | |
| BG00285281 | Arm shield, secondary top shell | |
| 452.7654-001 | Spider bushing | 90 |
| 452.7661-001 | Support ring | |
| 452.8508-001 | Spacer,Fasteners for concave, to support ring and top shell | |
| 452.8403-001 | Support ring | 198 |
| 452.8357-001 | Sleeve,Fasteners for concave, to support ring and top shell | |
| BG00285281 | Arm shield, secondary top shell | |
| 452.7654-001 | Spider bushing | |
| 840.1124-00 | Screw M6S M42x280 8.8 ZP,Fasteners for top shell | |
| 452.8240-001 | Concave M,M1 | |
| 452.8240-002 | Concave M,M2 | |
| 452.8239-001 | Concave MC,M1 | |
| 452.8239-002 | Concave MC,M2 | |
| 452.8238-001 | Concave C,M1 | |
| 452.8238-002 | Concave C,M2 | |
| 452.8231-001 | Concave EC Topgrip,M1 | 1526 |
| 452.8231-002 | Concave EC Topgrip,M2 | 1526 |
| 452.7598-001 | Mainshaft sleeve | 101 |
| BG00161884 | Head nut, inner | |
| 452.7598-001 | Mainshaft sleeve | |
| BG00161883 | Head nut Ar. | |
| BG00161884 | Head nut, inner | |
| 452.8232-001 | Mantle A,M1 | |
| 452.8232-002 | Mantle A,M2 | |
| 452.8233-001 | Mantle B,M1 | 1228 |
| 452.8233-002 | Mantle B,M2 | 1228 |
| 452.8236-001 | Mantle EF,M1 | |
| 452.8236-002 | Mantle EF,M2 | |
| 452.8243-001 | Mantle FlexiFeed B,M1 | |
| 452.8243-002 | Mantle FlexiFeed B,M2 | |
| 452.8244-001 | Mantle OB,M1 | |
| 452.8244-002 | Mantle OB,M2 | |
| 452.8262-001 | Head nut protection steel HB 360-440 | 9 |
| BG00166681 | Eccentric bushing 42+38+34+30 | |
| BG00166425 | Eccentric bushing 58+54+50+46+42 | |
| BG00162890 | Eccentric bushing 70+66+62+58 | |
| BG00166681 | Eccentric bushing 42+38+34+30 | |
| 452.7765-901 | Gear and pinion 50 Hz,Gears and pinions can not be ordered sepa- rately. | |
| 452.8289-901 | Gear and pinion 60Hz | |
| 452.8450-901 | Bottom shell arm liners | 649 |
| BG00524140 | Bottom shell transport protection, Plywood | |
| 452.7644-001 | Bottomshell bushing JM 14-15 | 240 |
| 452.7645-001 | Eccentric wearing plate | 43 |
| BG01393294 | Pinion shaft arm liner,M1 | |
| 452.7651-001 | Hydroset cylinder bushing | |
| 452.7717-901 | Step bearing set | 150 |
| 452.7651-001 | Bushing, Cylinder, Hydroset | |
| 902.0850-00 | Logic element valve NS80, 2 bar, D2.5 | |
| 984.1677-00 | Heater cartridge 10x160, 200W, 24V | |
| 902.1152-00 | Logic element valve NS80, 4500L/min, 8bar | |
| BG01222314 | Pinion shaft housing | |
| 452.7902-001 | Drive shaft | |
| 452.7931-001 | Outer pinion shaft spacer | |
| 868.0832-00 | Bearing 32230 J2 | |
| 452.8145-001 | Inner pinion shaft spacer | |
| 452.7931-001 | Pinion shaft outer spacer | |
| 452.8145-001 | Pinion shaft inner spacer | |
| BG00167362 | Subframe Direct drive as | |
| BG00232552 | Protection cap AS for shaft | |
| BG00662266 | Dust Seal CH860/CH865,Subframe | |
| BG00696397 | Frame (Option) | |
| 930.0333-00 | Elastic coupling Omega E120 HDY with fasteners | |
| 452.1746-001 | Bushing compression | |
| BG00261355 | Bushing OMEGA 120 HDY | |
| 972.1700-00 | Electric motor,HGF 400C/D/E-500-6-B3R(E) 3300 V 60 Hz,500 kW (680 hp) | |
| BG01198959 | Inductive Sensor M18x1, M12 A Male, SW24 | |
| BG00696397 | Frame,Option | |
| BG00704579 | Frame | |
| 126.0785-001 | Sign, earth connection,Placed on bottom shell next to M10 thread | |
| BG00282626 | Lifting tool,Eccentric bushing | |
| BG00282627 | Lifting tool,Bottom shell bushing | |
| BG00321725 | Lifting tool,Step bearings | |
| 899.0504-00 | Eye bolt VRS-F-M48 Swivel,Main shaft | |
| BG00514714 | Tool Gear/pinion | |
| BG00740716 | Top shell alignment tool | |
| 452.8240-001 | Concave M,M1 | |
| 452.8240-002 | Concave M,M2 | |
| 452.8239-001 | Concave MC,M1 | |
| 452.8239-002 | Concave MC,M2 | |
| 452.8238-001 | Concave C,M1 | |
| 452.8238-002 | Concave C,M2 | |
| 452.8231-001 | Concave EC Topgrip,M1 | |
| 452.8231-002 | Concave EC Topgrip,M2 | |
| 452.8232-002 | Mantle A,M2 | |
| 452.8232-002 | Mantle A,M1 | |
| 452.8233-002 | Mantle B,M2 | |
| 452.8233-002 | Mantle B,M1 | |
| 452.8243-002 | Mantle FlexiFeed B,M2 | |
| 452.8243-002 | Mantle FlexiFeed B,M1 | |
| 452.8450-901 | Bottom shell arm liner kit | |
| BG00245072 | Bottom shell liner kit bolted- Hardox | |
| 452.8232-001 | Mantle A M1,Alternative or order connected | |
| 452.8232-002 | Mantle A M2 | |
| 452.8233-001 | Mantle B M1 | |
| 452.8233-002 | Mantle B M2 | |
| 452.8243-001 | Mantle Flexifeed B M1 | |
| 452.8231-001 | Concave EC M1 CH860,Alternative or order connected | |
| 452.8238-001 | Concave C M1 CH860 | |
| 452.8239-001 | Concave MC M1 CH860 | |
| 452.8240-001 | Concave M M1 CH860 | |
| BG00353433 | Concave sealing kit EC,Alternative or order connected | |
| BG00353429 | Concave sealing kit C | |
| BG00353417 | Concave sealing kit MC | |
| BG00353412 | Concave sealing kit M | |
| BG00161883 | Head nut assembly,1 Head nut / Burning ring per every second manganese change | |
| 452.8262-001 | Head nut protection | |
| 452.7654-001 | Spider bushing | |
| 452.7717-901 | Step bearing set | |
| 452.7598-001 | Main shaft sleeve | |
| BG00270638 | Fastener kit concave support | |
| 452.7644-001 | Bottom shell bushing | |
| BG00162890 | Eccentric bushing 58 +62+66+70,Alternative or order connected | |
| BG00166681 | Eccentric bushing,30 + 34 + 38+ 42 | |
| BG00166425 | Eccentric bushing,42 + 46+ 50+54+58 | |
| 452.7645-001 | Eccentric wearing plate,Alternative or order connected | |
| BG00270742 | Pinion shaft repair kit | |
| 452.7902-001 | Pinion shaft | |
| 452.7763-001 | Inner head nut | |
| 452.7765-901 | Gear and pinion 50Hz,Alternative or order connected | |
| 452.8289-901 | Gear and pinion 60Hz | |
| BG00274502 | Main shaft assembly excluding mantle | |
| BG00273716 | Top shell assembly excluding concave | |
| BG01283642 | Pinion shaft housing assembly excluding pulley |
ZHEJIANG ROCK MACHINERY CO., LTD
Registered in China
Registration number: 91330782MACQ9CX477
Focus on ore processing machines
Leader of aftermarket mining parts
Over 20 years of specialized experience
Full parts support
Fast delivery and quick response